Carraro Axle Groups

Carraro
By Original Parts 4 You Blog Team on Sep 17 2020

As many things have changed from the past to the present, there have been important developments in the spare parts sector. Brands that could not keep up with the times and develop production technology had to put an end to their professional lives. Carraro has adapted to the times with its production techniques of original spare parts and gained the trust of its users. Carraro has made great changes and developments in the axle groups as well as in all of its parts. The changes made in the development and applications of Carraro axle groups are given below.

Carraro Axle Groups for Agricultural Machinery

Carraro 707 Axle (formerly axle 705): axle was included in the axle group ae1. It was an axle set used in 90 model agricultural machines. It was widely used for the lower segment. It was compatible with many agricultural types of machinery. These brands are; New Holland, Case, Caterpillar, Same Deutz Fahr, Terex, Komatsu, Claas, McCormick.

Carraro 709 Axle: axle was included in the ae2 group. It was an axle set used in 90 models of middle-segment agricultural machinery. The horsepower of these agricultural machines was between 70 and 90 horsepower. Compatible brands in the 707 axle group are valid within this axle group.

Carraro 715 Axle: axle was included in group ae3. It was an axle set used in 90 model upper segment agricultural machines. Compatible brands in the 707 axle group are valid within this axle group.

Carraro 20.09 Axle and Carraro 20.16 Axle: These axle groups, which are included in the Carraro ae1 axle group, were produced for agricultural machinery produced in the 2000 model and later. These axle sets are suitable for lower-segment agricultural machines.

Carraro 20.18 Axle and Carraro 20.29 Axle: These axle groups, which are included in the Carraro ae2 axle group, were produced for agricultural machinery produced in 2000 models and later. It can be assembled in full compliance with the axles of middle-segment agricultural machines.

Carraro 20.32 Axle and Carraro 20.80 Axle: These axle groups, which are included in the Carraro ae3 axle group, were produced for the upper segment agricultural machines produced in 2000 models and later.

Carraro Axle Groups for Construction Machinery

Axles for construction machines were produced separately as front and rear seats. While the front axle assemblies were movable/dynamic, the rear axle assemblies were fixed/stable.

Carraro Front Axles for Construction Equipment

Carraro 708 Axle: included in axle ae1 axle group. It was a movable front axle set used in 90 model construction machines. It was suitable for the lower segment.

Carraro 710 Axle: included in axle ae2 group. It was an axle set used in 90 model medium segment construction machines. The horsepower of these machines was between 70 and 90 horsepower.

Carraro 716 Axle: included in ae1 axle group. It was a movable front axle set used in 90 model construction machines. It was suitable for upper segment construction equipment.

Carraro 26.00 - 26.09 - 26.16 Axle: These axle sets, which are included in the Carraro ae1 group, are used for 2000 model and later construction machines. It is suitable for lower-segment construction equipment.

Carraro 26.18 - 26.28 Axle: These axle sets, which are included in the Carraro ae2 group, are used for medium segment 2000 model and later construction machines.

Carraro 26.32 - 26.52 Axle: These axle sets, which are included in the Carraro ae3 group, are used for the upper segment 2000 model and later construction equipment.

Carraro Rear Axles for Construction Equipment

Carraro 8.14 Axle: axle was included in the ae1 axle group. It was the stable rear axle set used in 90 model construction equipment. It was suitable for the lower segment. These work machines had maximum torque.

Carraro 711 Axle: axle was included in the ae2 group. It was the rear axle set used in 90 model medium segment construction machines. Horsepower was between 70 and 90 horsepower.

Carraro 717 Axle: axle was included in the ae3 axle group. It was the stable rear axle set used in 90 model construction equipment. It was suitable for upper segment construction equipment.

Carraro Axle 28.09 - 28.16: axle sets included in the Carraro ae1 group are used for the 2000 model and later lower segment construction equipment.

Carraro Axle 28.18 - 28.28: axle sets included in the Carraro ae2 group are used for medium segment construction machines of 2000 model and later.

Carraro Axle 28.32 - 28.60: axle sets included in the Carraro ae3 group are used for 2000 model and later upper segment construction equipment.